 |
- During setup you will be asked for the hardware serial number.
- On InkLink, the serial number is located on the bottom of the InkLink data clip.
- On the original SmartPad, the serial number is under the paper writing pad, in the lower-left corner.
- On the SmartPad2, the serial number is under the paper writing pad, in the upper-right corner.
- The first part of the serial number might already be displayed in the form. Be sure you don't repeat the first few characters.
- You might be asked for a software purchase code during setup.
- If you purchased an InkLink Handwriting System, and have entered the hardware serial number correctly, you should not see this prompt. Click Back and correct the hardware serial number.
- If you have a SmartPad that came with InkNote Manager software, and you have entered the hardware serial number correctly, you should not see this prompt. Click Back and correct the hardware serial number.
- If you have a SmartPad that originally supported Palm OS handhelds, and did not include InkNote Manager software, you must purchase an upgrade to InkNote Manager 3.x. This upgrade will be availble soon.
- If you have previously purchased an upgrade to InkNote Manager, enter the software purchase code you received when you purchased the upgrade.
- If you are going to use your InkLink with a handheld, be sure to check the appropriate Palm or Pocket PC box in addition to Desktop, so setup will install the handheld version of InkNote Manager correctly.
- On Windows NT, 2000, or XP, you must have administrative rights to install the software.
- If you get an error during setup, disable your anti-virus program and run setup again.
|
|
|
